Description
Breeze B9226-0275B spring-loaded T-bolt clamp with a 2-3/4″ to 3-1/16″ (70mm to 78mm) effective diameter range and a 3/4″ (19mm) wide stainless band. The constant-tension spring stack maintains seal pressure as silicone and rubber hoses expand and contract through thermal cycles, eliminating cold-flow leaks that plague conventional worm-drive clamps. A 1/4″-28 plated trunnion bolt and stainless trunnion-and-anchor pin set the clamp around the hose for repeatable torque on installation.
Specifications
| Manufacturer | Breeze |
|---|---|
| Part Number | B9226-0275B |
| Part Type | Standard Spring (Belleville stack) T-Bolt Hose Clamp |
| Diameter Range | 2-3/4″ to 3-1/16″ (70mm to 78mm) |
| Band Width | 3/4″ (19mm) |
| Band Material | 300-series Stainless Steel |
| Bolt | 1/4″-28 plated |
| Standard | SAE J1508 Type SLTB |
Cross References
This clamp is also catalogued under the following part numbers:
- Also known as: 022581, 46188, B92260275
Applications
This T-bolt clamp is used wherever a high-load, repeatable-torque connection is required:
- Charge-air-cooler (CAC) silicone-hose connections on turbocharged diesel engines
- Coolant and air-induction hose connections on heavy-duty truck engines
- Exhaust and aftertreatment hump-hose connections (where applicable)
- Marine, industrial, and off-highway hose-clamp service
Verify your hose outside diameter falls within the 2-3/4″ to 3-1/16″ range before ordering. Tighten to the hose / OEM spec — typical 60–95 in-lb range; do not exceed the bolt rating.
