Description
Atlas BP12000X
The Atlas® BP-12000 is a commercial grade heavy duty 12,000 LB. capacity 2 post base plate above ground lift. This above ground lift has over sized columns, symmetric three stage arms, and single point lock release. This lift is perfect for those commercial garages that want to lift heavier vehicles but have limited ceiling height. The Atlas® BP12000 can be installed at two different width settings to accommodate wider trucks or trailers and to facilitate “driving between” the lift columns.
| Capacity | 12,000 LB. | ||||||
| Lifting Time | Ask Your Salesperson | ||||||
| Overall Height (With Cylinder) | 122 1/2″ | ||||||
| Overall Width (With Handle/Boxes) | 154 1/2″ (Wide Configuration) 149 1/8″ (Narrow Configuration) |
||||||
| Overall Width | 150 3/4″ (Wide Configuration) 145 3/8″ (Narrow Configuration) |
||||||
| Outside Column to Outside Column | 141 1/4″ (Wide Configuration) 135 7/8″ (Narrow Configuration) |
||||||
| Maximum Lift Height (Without Adapters) | 70 1/4″ | ||||||
| Maximum Lift Height (With Adapters) | 80 3/4″ | ||||||
| Minimum Arm Height | 4 1/2″ | ||||||
| Base Plate Width | 11 1/2″ | ||||||
| Inside Column | 123 1/2″ (Wide Configuration) 118 1/8″ (Narrow Configuration) |
||||||
| Drive Thru | 109″ (Wide Configuration) 103 5/8″ (Narrow Configuration) |
||||||
| Column Size | 8 3/4″ x 14″ | ||||||
| Column Thickness of Steel | 6mm | ||||||
| Carriage Thickness of Steel | 6mm | ||||||
| Arms Thickness of Steel | 6mm | ||||||
| Cable Diameter | .375″ | ||||||
| Base Of Lift | 18 1/2″ x 21 1/2″) | ||||||
| Motor/Electrical Requirement | 2HP 220V +/- 5% (209-231volts) single (1) phase. A 30 amp breaker is required. |
||||||
| Oil Requirement | 3-5 Gallons AW32/AW46 | ||||||
| Shipping Weight | 2,300 LB. | ||||||
Requires a minimum of 6″ of concrete with 3000 psi.
All lifts come with a step by step instruction manual.
