Description
This Kit Is Used to Fabricate your own fuel fill hose for many models of GM automobile Equipped with 1-1/4″ Tank Fitting and 1″ to 1-1/4″ Neck.
Cut this hose down to match your current hose and angle and use the reducer to adapt to you application.
Spec= Rubber 45 Degree Elbow and 1-1/4″ to 1″ ID reducer. PN B01 (If you have a 1-1/8″ Filler Neck use ID reducer B07)
Inside Diameter: 1-1/4″ Or 1 Inch using included Reducer
Overall Hose Length:
SAE= 15″X15″ inch. Total 30″
Metric= 736mm
Material:=Nitrile Buna Gasoline Grade Rubber.
Maximum Pressure(psi)=20 psi
