Description
These Filler Necks Work Great when you are doing a Bed takeoff and need a slight downward angle to get to the tank. They work with just about any mounting situation and offer a “BIG MOUTH” design that accommodates truck stop diesel pumps.
| Fuel Type: | Gasoline Engine Only! |
| Cap Type: | Non locking Part 31833 / Locking Part number 31780 (Click Here) |
| Flange Angle: | 25° Degree |
| Main Pipe Diameter: | 1-3/4″ OD. |
| Vent Pipe Diameter: | 3/4″ OD. |
| Flange Diameter: | 3-1/2″ |
| Flange Thickness: | 3/16″ |
| Coating: | Premium Powder Coating! |
| NOTES: |
Holes may need to be drilled in flange to adapt to your application. Works great with our Flatbed 90 Degree Mounting Bracket PN BRK001 (Sold Separately). Note: Vent Line Comes Off Of The Right Side of This Piese (SEE PHOTO 2) |
| Country Of Manufacture: | Made In The U.S.A |
| RELATED ITEMS: | See related caps, hoses and fixtures at the bottom of this page. |
