Description
With the most adjustable nozzle in the industry, this undercoating gun was designed to spray undercoating and rustproofing to vehicles.
Screw the nozzle inwards to restrict the product flow allowing only a fine mist to be sprayed. Adjusting the nozzle outwards will increase the product flow and create a more pronounced textured finish.
It features a solvent resistant vinyl tank connector and aluminum tank.
- 1/4″ NPT air connector
- Adjustable Nozzle
- Aluminum body
- Aluminum intake tube 7″ long
- Approximate air consumption: 200-300L/min
- Working pressure: 3-4 bar/40-80 psi
- Prod ID: RA1T
- Prod ID: RA1T/R (included air regulator)
- Replacement Parts
- Air regulator is not installed. Quick, easy to install instructions included.
The gun can be equipped with an optional spray wand for areas that are difficult to reach, ie; around mufflers and exhaust pipes, inside cavities, beams and car doors.
- Undercoating Wand, 24 inches long (RA1/UCW)
for use with undercoating liquids only - Rustproofing Wand, 32 inches long (RA1/RPW)
for use with rustproofing coatings only
This spray gun is not for use with motor oil or paints. Cleaning instructions are included. Does not need to be disassembled to be cleaned. Additional spray wands available for purchase separately.
Sprayer
WARNING: This product can expose you to lead, a chemical which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to: www.P65Warnings.ca.gov.
