Description
Filler Neck Hole Opening Diameter: 2-1/2″
Neck Offset Angle: 21° Degrees.
Length From Back of Flange: 2.65″ at Deepest Point / Top
Surface Flange Dimensions OUTER: 7.13″ Wide X 6.88″ Tall.
Surface Flange Dimensions INNER: 5.50″ Wide, 5.25 Tall.
Finish: Bead Blasted with Polished Flange.
Material: A356.2 Aluminum.
Notes: Screw holes will need to be drilled in flange to adapt to your application.
Photo is of 42° degree Housing; Actual part is 21° and similar in appearance.
See related Products Below!
