Description
The heavier piston, turbo-prop and jet powered aircraft weighing up to 32,000 lbs. (14,517kg) are too valuable to consider using anything less than the A700 Series Aircraft Jacks from Meyer Hydraulics. Meyer Hydraulics aircraft jacks continue to set the standard for safe, dependable lifting at affordable prices. This Series of professional hydraulic lifting equipment handles airplanes and helicopters with the security and features one should demand in an aircraft jack.
Product Diagram Explanation Below:
A: INNER SLIDE TUBE – The 3.5″ (89mm) diameter powder-coated Tube forms the foundation of the TriTask Aircraft Jack System. The zigzag pattern of 1″ (25mm) safety lock-out holes are vertically spaced 1.5″ (38mm). The Tube’s top has a 1″ (25mm) diameter threaded hole designed to receive an AT-JPR Jacking Point Receiver, a Top-of-the-Jack Load Cell or an AT-EB Extension Bar.
B: POSITIVE SAFETY LOCK – Spring-loaded safety pin “pops” into the Inner Slide Tube and rests on top of the Jack’s frame to prevent the accidental lowering of the aircraft.
