Description

The Maxx kit will include one TR-EOHA1600 DeeMaxx 1600 PSI electric over hydraulic actuator with built in capability adapter, one Deemaxx 18 Foot Single Axle Brake Flex Hose Kit, one 2311-ZIP4 top load LED breakaway kit & charger w/ 4′ Zip Breakaway Cable and two 3,500 lbs. DeeMaxx gold zinc finish calipers with DeeMaxx disc brakes and Timken® bearings.

The TR-EOHA1600, electric over hydraulic brake actuator with its sleek and modern design, was created with high-quality standards to withstand even the harshest conditions. Its compact size allows for easy installation, and brake line fitting with 360 degrees of movement is included to connect your brake line from all mounting positions. In addition, all DeeMaxx 1600psi brake actuators have a swift response time, reaching 1,000 psi in 0.184 seconds.

DeeMaxx TR-EOHA1600 Electric Over Hydraulic Brake Actuator

Features:

This electric over hydraulic brake actuator has an in-built compatibility adapter, so no external compatibility device is necessary.
High-powered DC motor and quality pump with minimal moving parts.
Weatherproof, anodized alloy case protects components from external elements (such as saltwater, extreme temperatures, and poor road conditions).
Anodized, T6-grade extruded alloy housing protects from different environments and has a great aesthetic design.
Independently sealed fluid tank.
Conformal coating on the circuit board is designed to provide extra protection from moisture.
Two-year no-hassle warranty.

Specifications:

DOT Compliant
Trailer Mounted
Application: Disk brakes for single, tandem, tri, and quad axel trailers
Distance between mounting holes: 10.95” & 1.38” (278mm & 35mm)
Mounting Hole Diameter 1.2cm x 0.8cm (12 x 8 mm) slot
Hydraulic Port Size: 3/16 inverted flare (standard brake line fitting)
Dot 4 Brake Fluid
Fluid Capacity of 15.7 oz
Power: 12V DC (min 30-amp circuit)
Max Current Draw at full pressure approximately 18-24 amps.
Wire Configuration:
- Black: 12-volt power
- Blue: brake controller
- Yellow: breakaway
- White: ground
Wire Gauge Recommendation
- A minimum of 10 gauge on black and white
- A minimum 12 gauge on blue and yellow
Dimensions:
- Length: 10” (255mm)
- Height: 6” (152mm)
- Width: 3.6” Base / 1.7” Top (90mm Base / 44mm Top)
- Mounting centers: 10.9” L and 1.6” W (275mm and 40mm)

3,500 lbs. DeeMaxx Gold Finish disc brake:

5 lug 1/2″ studs. 10″ Integral vented rotor.
Unique rotor cross section design actively draws cooling air from the rotor interior!
Exclusive 120º bleeder design means better bleeding, balanced system, and no more damaged bleeders!
Exclusive laser writing on caliper means instructions are always there!
Every caliper is tested to 2000 psi
Robust ductile iron casting eliminates flexing resulting in more brake torque.
Exclusive bolt design means no more mishandling or incorrect shipping of bolts.
Compatible with every surge and electric over hydraulic actuators!
Ceramic brake pads are slotted, chamfered, & feature a stainless steel clip
Unique bracket design provides twice as many mounting options for caliper position
Produced in ISO Quality certified factories!
Passed the SAE J2681 Brake test!

Part No	Quantity	Description
TR-EOHA1600	1	DeeMaxx 1600 PSI Electric Over Hydraulic Actuator
2311-ZIP4	1	Top load LED Breakaway Kit & Charger with 4′ zip Breakaway Cable
DOT-SA18K	1	DeeMaxx 18 Foot Single Axle Brake Flex Hose Kit
716LW	8	7/16″ Lock Washer
716NFN	8	7/16″ HEX Fine Nut
716X114NFBLN	8	7/16″ Mounting Bolt
DC-RPY	2	DeeMaxx Yellow Silicone Rubber Lube Plug
FS622	2	1.98″ Lube Dust Cap
DM35KROTOR	2	DeeMaxx 10.2″ Rotor & Hub 5 Lug Integral with Maxx Coating
SWCALP3-6KGOLD	2	DeeMaxx 3,500 – 6,000 lbs. Gold Zinc Plated Finish Disc Brake Caliper w/Semi-Metallic Pads
DBB-3.5KI-MAXX	2	DeeMaxx Disc Brake Bracket for 3.5K Axle Integral Rotor Maxx Coating
L68149	2	Timken® Inner Bearing
L44649	2	Timken® Outer Bearing
GS-1719DL	2	1.719″ ID Double Lip Grease Seal
X1023R	10	1/2″-20 Lug Nut 60 Degree 13/16″ WAF