Description
Forged brass DOT push-in 90° male swivel elbow joining 3/8″ SAE J844 nylon air brake tubing to a 3/8″ male NPTF port. The swivel body rotates after assembly so the tube run can be aligned without twisting the line. Meets D.O.T. FMVSS 571.106 and SAE J1131 air brake performance requirements; commonly cataloged as 02569-0606.
Specifications
| Manufacturer | Midland Industries |
|---|---|
| Part Number | 690606S |
| Part Type | DOT Push-In Forged Brass 90° Male Swivel Elbow |
| Tube OD | 3/8″ |
| Pipe Thread | 3/8″ Male NPTF |
| Body Material | Forged Brass |
| Swivel | Yes — body rotates after assembly for line positioning |
| Bend Angle | 90° |
| Working Pressure | Up to 150 PSI |
| Temperature Range | -40°F to +200°F |
| Thread Sealant | Pre-applied PTFE-based pipe sealant |
| Compliance | DOT FMVSS 571.106, SAE J1131 |
| Tubing Compatibility | SAE J844 nylon air brake tubing |
Cross References
This part replaces or is equivalent to the following part numbers:
- Velvac: 16266
- Parker: PC1469SW-6C
- Alkon: AQ69-DOTS-6X6
- Tramec Sloan: S269PMT-6-6
- Norgren: 95411420M
- Anchor: 1869x6x6S
- Also known as: 02569-0606, 269PCS-6×6, 269PPSDOT-6C, 51915K34, 969-1-66, DQ69DOTS-6X6, NP69SW-6-6
Applications
Used throughout Class 6–8 commercial truck and trailer pneumatic systems wherever DOT-rated air brake tubing connects to a threaded port:
- Air brake system plumbing — service, supply, and control lines on tractors, semi-trailers, and straight trucks
- Air tank, relay valve, quick-release, brake chamber, and dryer port connections
- Air suspension lines, height-control valves, and ride-height plumbing
- Air-operated accessories: seats, fifth wheels, air horns, door locks, mirrors, shift controls
- Freightliner, Kenworth, Peterbilt, International, Volvo, Mack, and Western Star tractors and trailers
Verify tube OD and port thread size before ordering. Tubing must be cut square, deburred, and fully seated to achieve a proper seal.
