Description
The Dexter® Axle Dexter Pre-Greased Easy Assemble 6 on 5.5″ Hub and Drum for 5,200 lbs. Trailer Axle (Part K08-201-2G) is a genuine Dexter pre-greased hub and drum assembly designed for easy installation on 5,200 lb. trailer axles. From a novice to an expert in trailer repair, make life easy with the pre-greased easy to install trailer hub and drum from Dexter®. The experts at Dexter® Axle have already prepared the hub and drum to go on the trailer spindle smoothly.
Key Features
- Part Number: K08-201-2G
- Brand: Dexter®
- Axle Capacity: 5,200 lbs. (6K rated)
- Bolt Circle: 6 on 5.5″
- Type: Pre-Greased Hub and Drum Assembly
- Seal: 2.25″ seal
- Convenience: Bearings, seal, and grease pre-installed with the exact amount needed
- Contents: E-Z Lube® & standard grease caps, spindle attachment hardware & lug nuts
- Quality: Genuine Dexter OEM replacement part with easy-to-read instructions
Don’t worry about where the seal, inner, and outer bearings go — it is already done for you. The kit comes with all the parts you need to complete the installation no matter what type of spindle you have. Bearings and seal come installed & pre-greased for reliable, long-lasting performance.
Questions about this Dexter hub and drum or compatibility with your axle? Call our trailer experts at 1-800-866-3336.
Browse more Hub & Drum Assemblies.
| Dx Part No | Quantity | Description |
| 008-201-09 | 1 | Hub & Drum,6K,15245 Outer Cup |
| 031-030-02 | 1 | Bearing Cone 25580 |
| 031-029-02 | 1 | Bearing Cone 15123 |
| 010-036-00 | 1 | Seal 2.25″ |
| 006-080-00 | 6 | Nut, Cone 60-Deg |
| 021-001-00 | 1 | Grease Cap |
| 021-042-01 | 1 | Grease Cap |
| 085-001-00 | 1 | Rubber Plug |
| 006-190-00 | 1 | Nut, Retainer |
| 006-191-00 | 1 | Nut, Hex |
| 005-057-00 | 1 | Washer, “D” |
| 005-223-00 | 1 | Washer |
| 019-002-00 | 1 | Cotter Pin |
| 059-831-00 | 1 | Instruction Sheet |
| 006-176-00 | 1 | Nut, Slotted |
Dexter® Pre-Greased Easy Assemble Hub & Drum Installation Instructions
From a novice to an expert in trailer repair, make life easy with the pre-greased easy to install trailer hub and drum from Dexter®. The experts at Dexter® Axle have already prepared the hub and drum to go on the trailer spindle smoothly. Don’t worry about where the seal, inner, and outer bearings go — it is already done for you with the exact amount of grease you need to run the trailer axle properly.
Key Features
- Pre-Greased Hub and Drum Assembly
- Bearings and Seal pre-installed with correct grease amount
- Includes E-Z Lube® Grease Cap and Standard Grease Cap
- Spindle attachment hardware and lug nuts included
- Easy-to-read instructions for fast installation
- Designed for 5,200 lb. – 6,000 lb. axles (6 on 5.5″ bolt circle example)
Installation Steps
- Clean and lightly grease the spindle shaft.
- Slide the pre-greased hub & drum onto the spindle.
- Install spindle washer, nut, and cotter pin. Torque to specification while rotating the hub.
- Install the E-Z Lube® or standard grease cap.
- Mount the wheel and tighten lug nuts in a star pattern to proper torque.
Pro Tip: Repack or inspect bearings annually or every 12,000 miles. Use high-temperature marine grease for boat trailers.
Questions about installation or compatibility? Call our trailer experts at 1-800-866-3336.
Browse more Hub & Drum Assemblies.
