Description
The Alliance ABP-SET429 is an aftermarket PreSet tapered roller bearing matched set comprising a 594A cone and 592A cup, used on heavy-duty R-series drive axle outer wheel hubs (ConMet, Webb, Stemco PreSet/PreSet Plus). It replaces Timken SET429 (NP363298 cone / NP034946 cup) — the PreSet variant of the SET403 — at the spec’d 3.75 in bore / 6.0 in cup OD / 1.563 in width.
Specifications
| Manufacturer | Alliance |
|---|---|
| Part Number | ABP-SET429 |
| Part Type | Tapered Roller Bearing & Race Set (Cone + Cup, PreSet) |
| Cone | 594A (3.75 in / 95.25 mm bore) |
| Cup | 592A (6.0 in / 152.4 mm OD) |
| Width | 1.563 in (39.688 mm) |
| Replaces | Timken SET429 (NP363298 / NP034946) |
| Position | R-series drive axle outer wheel bearing |
Cross References
This bearing and race set replaces or is equivalent to the following part numbers:
- Timken (PreSet): SET429, NP363298 (cone), NP034946 (cup), NP363298/NP034946
- Timken (non-preset): SET403 (same 594A/592A components)
- Also known as: 10041915, 107502, 363298, 592A/594A Cone & Cup, 594APW5/592APW1, ASET594A-92, HD429, NBSET429, NP454298/NP454946, RBT10434/LBT10434, SET600 (additional service numbers found across distributor catalogs; brand attribution not independently confirmed)
Applications
This PreSet bearing set fits R-series drive axle outer wheel hubs spec’d to 594A/592A. Representative applications include:
- ConMet PreSet / PreSet Plus hubs on Meritor and Eaton drive axles
- Webb and Stemco PreSet drive axle hubs
- Heavy-duty Class 7–8 drive axles using 594A/592A bearings
Verify the cone bore (3.75 in) and cup OD (6.0 in) on your existing bearing or the hub’s parts spec sheet before ordering. Confirm PreSet vs. non-preset application — substitute SET403 if your hub is non-preset.
