Description
The Dexter® Axle Dexter® Pre-Greased Easy Assemble 8 on 6.5″ Hub and Drum 9/16″ Studs Nev-R-Adjust Electric Brake Kit for 7,000 lbs. Trailer Axle (Part PGBK42865ELEAUTO916) is a complete, professional-grade brake and hub assembly. This pre-greased kit includes everything needed for fast, hassle-free installation on one side of a 7,000 lb. trailer axle.
Key Features
- Part Number: PGBK42865ELEAUTO916
- Capacity: 7,000 lbs. Trailer Axle
- Bolt Circle: 8 on 6.5″
- Studs: 9/16″-18
- Hub/Drum: 12″ Pre-Greased with 2.25″ Seal
- Brakes: 12″ x 2″ Nev-R-Adjust Self-Adjusting Electric Drum Brakes
- Brake Part Numbers: Dexter 023-464-00 (LH) & 023-465-00 (RH)
- Bearings & Seal: Pre-installed and pre-greased
- Includes: E-Z Lube & standard grease caps, spindle hardware & lug nuts
- Brand: Genuine Dexter® Axle
From a novice to an expert in trailer repair, make life easy with the pre-greased easy to install trailer hub and drum from Dexter®. The experts at Dexter® Axle have already prepared the hub and drum to go on the trailer spindle smoothly. Don’t worry about where the seal, inner, and outer bearings go, it is already done for you with the exact amount of grease you need to run the trailer axle properly. The kit comes with all the part you need to complete the installation no matter what type of spindle you have and to make installation easier the hub and drum comes with easy-to-read instructions.
This complete Dexter Nev-R-Adjust electric brake kit delivers reliable stopping power with minimal maintenance. The self-adjusting feature automatically compensates for brake shoe wear, while the pre-greased design saves valuable installation time.
Warranty: Backed by Dexter Axle’s manufacturer warranty. Please contact us for full warranty details.
Questions about this brake kit or compatibility with your trailer? Call our trailer experts at 1-800-866-3336.
Browse more Electric Brake Kits.
| Dx Part No | Quantity | Description |
| 008-219-13 | 2 | Hub & Drum,7K, 9/16″ |
| 031-030-02 | 2 | Bearing Cone 25580 |
| 031-017-02 | 2 | Bearing Cone 14125A |
| 010-036-00 | 2 | Seal 2.25″ |
| 006-053-00 | 16 | Nut, Cone 60-Deg |
| 021-039-00 | 2 | Grease Cap |
| 021-043-01 | 2 | Grease Cap |
| 085-001-00 | 2 | Rubber Plug |
| 006-190-00 | 2 | Nut, Retainer |
| 006-191-00 | 2 | Nut, Hex |
| 005-057-00 | 2 | Washer, “D” |
| 005-223-00 | 2 | Washer |
| 019-002-00 | 2 | Cotter Pin |
| 059-831-00 | 2 | Instruction Sheet |
| 006-176-00 | 2 | Nut, Slotted |
| 023-464-00 | 1 | 12″ x 2″ 5.2K, 6K, 7K Electric LH |
| 023-465-00 | 1 | 12″ x 2″ 5.2K, 6K, 7K Electric RH |
| 38LW | 10 | 3/8″ Lock Washer |
| 38NFN | 10 | 3/8″ Fine Nut |
| 363989 | 10 | 3/8″ Mounting Stud |
