Description
Solid-brass DOT push-to-connect 90° female elbow that joins 1/2 in. SAE J1131 nylon air-brake tubing to a 1/2 in. female NPTF port through a right-angle turn with no thread or compression hardware on the tube end. The Midland Industries 700808 carries SAE J2494-3 push-to-connect service and DOT FMVSS 49 CFR 571.106 air-brake compliance.
Signs You Need a New Push-to-Connect Female Elbow
- Audible air leak at the collet or threads
- Tubing pulls free under pressure or won’t fully seat
- Visible corrosion, pitting, or thread damage on brass body
- Slow brake-circuit pressure build or ABS DTCs tied to a leaking line
Specifications
| Manufacturer | Midland Industries |
|---|---|
| Part Number | 700808 |
| Part Type | DOT Push-to-Connect Female Elbow (90°) |
| Tube Connection | 1/2 in. OD Push-to-Connect (SAE J1131 nylon) |
| Pipe Connection | 1/2 in. Female NPTF |
| Body Material | Brass |
| Standards | SAE J1131, DOT FMVSS 49 CFR 571.106, SAE J2494-3 push-connect |
Cross References
This elbow replaces or is equivalent to the following part numbers:
- Also known as: 02470-0808, 1870x8x8, 270PC-8×8, 270PPDOT-8D, 270PPDOT-8D-Y, 95456430BP, AQ70-DOT-8X8, NP70-8-8, PC1470-8D, PC14708D
Applications
Used to redirect 1/2 in. nylon air-brake tubing 90° into a female-NPTF port on:
- Tractor and trailer service / supply / emergency lines
- Vocational-truck air-suspension and pneumatic accessory plumbing
- Bus and motorcoach chassis air plumbing
Use only with SAE J1131 nylon air-brake tubing on the push-in side. Use NPTF-compatible thread sealant on the female-thread mate.
