Description

Morrison Bros. Co. 710FSS Series Solenoid Valve – Normally Closed

Manuals and Information:

710F Spec Sheet

Normally closed solenoid valves are used to help prevent the accidentalsiphoning of a product from a tank in the event of a leak downstream belowthe liquid level. They are generally installed on the dispensing side of a fuelsystem pipeline. The valve opens upon the receipt of an electronic signal suchas when a dispenser or pump is switched to the on position.

Features:

Operates at 120 volts AC (24, 208, 220, 240, & 480 volts AC, and 12, 24,and 48 volts DC also available)
Minimum operating temperature is -40°F
Includes a continuous duty Class H standard coil. Other options are available
Must be mounted in a horizontal pipeline with solenoid vertical and upright
No differential pressure is required to open the valve
Connects to aconduit. 18″ lead wire provided
Enclosure is watertight and rated for hazardous locations on abovegroundfuel storage tanks- NEMA 3, 4X, 7 and 9; groups C and D
Available in Viton or Teflon seals (3″ only in Viton)
Has a built-in expansion relief
Flanged connections ANSI 150 RF
Maximum viscosity rating of 60 Centistokes
Manual overide feature available (Fig. 710FMO or 710FSM)

Construction:

Body: 304 Stainless Steel
Seals: PTFE

Certification:

CSA listed (File No. 108921, Model Z1314); Class I, Groups C and D; Class II,Groups E, F, and G. Class III, T3C

NOTE: It is strongly recommended that a line strainer with 100 mesh be installed at the inlet of this valve. Failure to do so may cause the valve tomalfunction and void the warranty.

NOTE: Product can only be pumped in the direction of the flow arrow. Not designed for use as overfill prevention or process control valve.