Description
Morrison Brothers – 710F2400200 1V – Solenoid Valve (FKM)
Normally closed solenoid valves are used to help prevent the accidental siphoning of a product from a tank in the event of a leak downstream below the liquid level. Generally installed on the dispensing side of a fuel system pipeline. The valve opens upon the receipt of an electronic signal such as when a dispenser or pump is switched to the on position.
- Normally closed, hung piston design
- Install in a horizontal pipeline in the upright vertical position
- Minimum operating temperature is -40°F
- Zero pressure differential
- Integral thermal relief allows the valve to relieve expansion pressure in the opposite direction of flow
- Continuous duty Class H standard coil operates at 120 volts
- Enclosure is watertight and rated for hazardous locations NEMA 3, 4X, 7 and 9; groups C and D
- Several optional coil voltages available
- Flanged body connections
- Recommended for use with liquids having a maximum viscosity of 60 centistokes
- A strainer with a 100 mesh screen is recommended at the valve inlet
Construction Details:
- Body: Cast bronze
- Seals: FKM, PTFE
- Solenoid housed in an integral, watertight, explosion-proof shell
