Sale!

Automann AB1DK20D-9584 Air Spring – Neway Suspension | Replaces W01-358-9584

Original price was: $149.99.Current price is: $37.50.

SKU: AB1DK20D-9584 Category: Tag:

Description

Automann AB1DK20D-9584 rolling lobe air spring with integrated AB9471P bracket, a direct aftermarket replacement for Firestone W01-358-9584 (1T15L-1.5 bellows) and Holland / Neway 90557250 on trailer-style rear suspensions. Compact 8.00″ design height fits low-clearance suspensions; rated 5,100 lb at 80 PSI and 6,400 lb at 100 PSI with an internal bumper.

Signs You Need a New Air Spring

  • Suspension sagging or sitting lower on one side
  • Visible cracks, dry rot, or chafing on the rubber bellows
  • Audible air leak at the bellows or top plate
  • Suspension dump / refill cycles run more frequently than normal
  • Harsh ride or excessive body roll despite correct ride height

Specifications

Manufacturer Automann
Part Number AB1DK20D-9584
Part Type Rolling Lobe Air Spring (with bracket)
Firestone Bellows Number 1T15L-1.5
Design Height 8.00 in
Maximum Height 14.40 in
Minimum Height 4.50 in
Maximum Diameter 11.40 in
Top Plate 9.00 in dia, 2 studs at 5.50 in C-to-C
Bottom Plate 9.53 in dia, composite (plastic), 1 hole
Load Rating @ 80 PSI 5,100 lb
Load Rating @ 100 PSI 6,400 lb
Natural Frequency 80 CPM
Bumper Internal
Bracket AB9471P (integrated)

Cross References

This part replaces or is equivalent to the following part numbers:

  • Firestone: W01-358-9584, 9584
  • Holland / Neway: 90557250, 90557224, 90557411
  • ContiTech: 68675
  • Meritor / Euclid: FS9584, E-FS9584
  • Dayton: 352-9584
  • Torque: TR9584
  • World American: WA01-9584C

Applications

This rolling lobe air spring fits trailer and truck suspensions originally specified with any of the cross-referenced part numbers, including:

  • Holland / Neway trailer suspensions using 90557250
  • Neway suspensions using 90557224 (low-clearance fitting)
  • Neway suspensions using 90557411
  • Other trailer and truck rear suspensions specified with W01-358-9584

Verify your existing part number and bracket configuration before ordering to confirm fitment.